Set up procedures:

Remove the machine from the crate and move to the location where it is to be used. Check to ensure the machine is sitting solid and level on the floor. If the machine rocks place shims under the machine feet until the machine is solid and level. Install anchors to the floor to keep the machine from "walking" during use. If the E+(electric) machine has been purchased plug the power cord into the wall receptacle ensuring the receptacle is grounded and any extension cord is 12AWG or larger with a max of 25FT in length. Fill the oiler with pneumatic tool oil, turn on the air supply and using the pressure regulator set the air pressure to 90PSI.